Dental 3D printer price guide

Summary

This guide compares dental 3D printer pricing as a total-cost-of-ownership question rather than a single printer sticker price. Most current dental printers are quote-led, and the real spend depends on resin, wash/cure equipment, tanks, service plans, software, validated indications, training, failures, and throughput.

This page uses the approved Phase 3 source set and treats missing prices, warranty terms, training, regional clearance, and support packages as unknown until a supplier confirms them in writing. Manufacturer claims are presented as manufacturer claims, not Dental Spec Guide testing.

Products and sourced details

1. Formlabs Form 4B

   Producer price status

   Visible producer price: Formlabs lists the Form 4B Basic Package at $7,699 on its US-facing dental store. Treat this as US store context, not a universal international price; taxes, shipping, reseller terms, voltage/package differences, and regional availability still need supplier confirmation.

   Relevant sourced detail

   Formlabs positions Form 4B as the practice/lab-size dental printer in its current Form 4 dental family.

   Key sourced details

   • The official product page describes an open-material direction, with the ability to print preferred third-party materials through Open Material Mode, while still offering Formlabs validated settings and its own dental material library.

   Workflow / procurement checks

   • For budgeting, that matters because the printer price is only the first line item: a real quote should include resin, tanks, build platforms, wash/cure hardware, support plans, training, and the material workflow your team actually intends to use.
   • The official page also emphasizes 50 micron pixel-size detail, automatic resin dispensing, validated print settings, PreForm and Dashboard software, cloud monitoring, and a Dental Service Plan that can include onboarding and support.
   • The strongest buying fit is a practice or smaller lab that wants a more transparent hardware price, a broad dental materials ecosystem, and a workflow that can start with models or appliances before scaling.
   • Ask which package is being quoted, whether Open Material Mode is enabled, which indications are validated for your region, what warranty/service level applies, and whether post-processing capacity matches the printer's advertised speed.

   Formlabs describes Form 4B as using Low Force Display technology and claims high throughput, including up to 11 models in 9 minutes and biocompatible appliances in under one hour, but those are manufacturer claims and should be tested against your own case mix before purchase.

   Unknowns to verify

   non-US price, tax and shipping, base warranty, package contents, Open Material Mode terms, third-party resin validation, post-processing capacity, training and support level.

2. SprintRay Pro 2

   Producer price status

   Quote-led: no current producer starting price was visible on the official Pro 2 page. SprintRay routes buyers toward demo and sales workflows, so pricing should be requested as a written itemized quote.

   Relevant sourced detail

   SprintRay Pro 2 should be evaluated as an integrated chairside and small-production dental printing workflow rather than just a standalone printer.

   Key sourced details

   • SprintRay's official page describes Pro 2 as using patent-pending Optical Panel technology with 385 nm UV-A light, a 35 micron Optical Panel, and the ability to print six or more full-arch dental models in a single job.

   Workflow / procurement checks

   • The page also presents several workflow kits: the Standard Kit for larger batch production, the Arch Kit for faster small batches and restorative applications, and the Duo Kit for printing with two materials or shades in one job.
   • Those kit distinctions are important for pricing because the same printer may support different production economics depending on whether the practice mainly prints models, night guards, restorations, dentures, or mixed-material work.
   • SprintRay also emphasizes PrintOS on a 12-inch touchscreen, cloud/network capability, resin tank and platform monitoring, an onboard workflow control center, and material/application workflows for night guards, models, restorations, dentures, surgical guides, and appliances.
   • For a quote, ask whether the price includes the relevant kit, tank/platform extras, software/design-service terms, resin starter material, post-processing hardware, support, training, and replacement optical panels or tanks.

   The official content contains many performance and usability claims, but Dental Spec Guide has not tested them; they should be treated as producer claims until validated in a demo using the buyer's own STL/scan files and intended resins.

   Unknowns to verify

   price, kit configuration, warranty, regional material availability, software/design-service terms, post-processing hardware, optical-panel replacement cost, training and support.

3. Asiga MAX 2

   Producer price status

   Quote-led: no current producer starting price was visible on Asiga's official MAX 2 page. The page directs buyers toward demo/reseller paths, so the acquisition cost should be confirmed through a reseller quote.

   Relevant sourced detail

   Asiga MAX 2 is best understood as a compact open-material DLP printer for buyers who care about resin flexibility, reseller support, and a smaller production footprint.

   Key sourced details

   • Asiga lists two MAX 2 variants: the MAX 2 (50) with a 96 x 54 x 76 mm build volume and 50 micron pixel size, and the MAX 2 (62) with a 119 x 67 x 76 mm build volume and 62 micron pixel size.
   • The official specification table lists DLP technology, an auto-calibrating 385 nm UV LED as standard, 405 nm available on request, STL/SLC/PLY/STM input formats, Wi-Fi/Wireless Direct/Ethernet networking, 12V 10A / 120W power requirements, and a system size of 260 x 385 x 370 mm with 19.3 kg weight.
   • Asiga highlights Open Material Architecture and states that more than 650 materials are available, while the technical table references more than 500 qualified resins; for procurement, the safe reading is that the MAX 2 is materially open, but indication-specific resin suitability must be verified for the exact dental application.
   • The listed bundle includes the printer, Composer software, 1 kg of Asiga material, a 1L build tray, Asiga Flash post-curing chamber, and calibration toolkit.

   Workflow / procurement checks

   • The official page says Composer software is included with lifetime updates, a 12-month manufacturer warranty is included, and unlimited lifetime technical support is included.
   • Since no official price is exposed, the quote should separate printer, bundled curing hardware, material starter options, reseller training, local support, replacement trays, and resin validation for the buyer's indications.

   Unknowns to verify

   price, reseller region, indication-specific resin suitability, warranty handling by market, replacement tray costs, training and support response.

4. HeyGears UltraCraft A2D

   Producer price status

   Quote-led: no current producer starting price was visible on the official UltraCraft A2D page. HeyGears' consumer store shows prices for Reflex-family products, but those are not the same dental-production A2D system and should not be used as the A2D price.

   Relevant sourced detail

   HeyGears UltraCraft A2D sits in a different buying category from small desktop consumer resin printers: it is presented by HeyGears as an industrial-grade dental-production printer for labs and production-oriented dental workflows.

   Key sourced details

   • The official A2D page describes a broad scope of dental applications, with examples spanning implants, orthodontics, and restorations, and highlights specifications including a 144 x 81 x 110 mm build volume, 1920 x 1080p resolution, 75 micron XY native pixel size, +/-37.5 micron accuracy, 385 nm light source wavelength, and a light-source life listed at more than 30,000 hours.
   • HeyGears also positions A2D inside a larger hardware/software/material ecosystem, so the purchasing decision should not stop at the printer cabinet.

   Workflow / procurement checks

   • The buyer should ask how the A2D connects to HeyGears design, nesting, post-processing, and material workflows; which dental applications and materials are validated in the buyer's country; whether the quote includes curing/cleaning hardware; and what distributor support looks like after installation.
   • The official hardware page also lists A2D-family variants and adjacent systems, so it is important to confirm whether the quote is for A2D, A2D 4K, A2D HD, or another UltraCraft model.
   • The safest procurement approach is to request a written configuration sheet with printer model, materials, post-processing, software/cloud terms, service, installation, and validated applications itemized.

   Because no official public starting price was found for the A2D page, Dental Spec Guide should label it quote-led, not estimate a price from unrelated HeyGears store products.

   Unknowns to verify

   price, exact A2D-family configuration, warranty, regional workflow validation, compatible materials, software/cloud terms, installation, post-processing and service.

5. Formlabs Form 4BL

   Producer price status

   Visible producer price: Formlabs lists the Form 4BL Basic Package at $16,249 on its US-facing dental store. Treat this as US store context, not a universal international price; taxes, shipping, reseller terms, voltage/package differences, and regional availability still need supplier confirmation.

   Relevant sourced detail

   Formlabs Form 4BL is the large-format production counterpart to Form 4B and should be evaluated for labs or production-heavy practices that need more platform capacity rather than simply a lower entry price.

   Key sourced details

   • Form 4BL is most relevant when the practice or lab can actually feed enough cases into the printer to justify the larger machine and post-processing capacity.

   Workflow / procurement checks

   • The official product page positions Form 4BL around throughput, claiming up to 20 restorative or 120 aligner models per hour, a large-format workflow, open-material support, and automation readiness for large-scale production.
   • Formlabs also claims the system can produce restorative models below a stated cost-per-part threshold, but procurement teams should treat cost-per-part claims as scenario-dependent because resin, labor, failed prints, nesting density, cleaning, curing, support removal, and remake rates all affect real cost.
   • The product page describes a 46 micron pixel size with pre-tuned anti-aliasing, a 145-LED backlight unit, high-speed conduction resin heating, two next-generation resin cartridges, cloud/Dashboard monitoring, and integrated camera support for remote monitoring, print history, and timelapses.
   • The store page shows the Basic Package at $16,249, but the bigger budget question is the complete production cell: Form Wash L, Form Cure L, large-format tanks, build platforms, service plans, materials, replacement consumables, workspace, ventilation/process controls, and staff training.
   • A buyer should ask for sample throughput calculations using their own model mix, including aligner models, restorative models, splints, guides, or denture workflows, and should confirm which materials and indications are validated in the region before treating the headline package price as a purchase budget.

   Unknowns to verify

   non-US price, availability, large-format post-processing cost, material validation, service plan, workspace requirements, installation and training.

Price and quote logic

For pricing pages, require itemized quotes rather than headline prices. The quote should separate hardware or subscription, software, onboarding, accessories, consumables, tax, shipping, warranty, support, training, financing, and cancellation or renewal terms.

Verify before purchase

• Exact package, model, software modules, accessories, and consumables included in the quote.
• Regional warranty, service response time, loaner or replacement policy, and support hours.
• Training format, implementation timeline, data migration or installation responsibilities.
• Recurring software, cloud, subscription, support, storage, materials, parts, or consumable costs.
• Compatibility with your current scanners, PMS, labs, CAD/CAM tools, materials, payment systems, imaging systems, or IT environment.
• Tax, shipping, financing, cancellation, renewal, and data-export terms.

Official links

Formlabs Form 4B official page SprintRay Pro 2 official page Asiga MAX 2 official page HeyGears UltraCraft A2D official page Formlabs Form 4BL official page

Evidence limits

Dental Spec Guide did not perform hands-on testing for this page. Product details should be rechecked before purchase because models, bundles, software terms, prices, and regional availability can change.