Summary
Used dental equipment can save money, but scanners, autoclaves, mills, and CBCT units carry service, software-transfer, licensing, calibration, validation, and parts risks. This guide focuses on what to verify before buying used or refurbished dental equipment, especially when the seller is not the original manufacturer or authorized service provider.
If you are still building the full budget, start with the new-practice dental equipment checklist, then use this page to decide which categories can safely be considered used and which should stay quote-led through an authorized supplier.
Use the current dental autoclave buying guide and intraoral camera comparison to establish the required load, software, infection-control, warranty, and service criteria before assessing a used listing.
Used equipment should be evaluated by serial-number history, condition, software and license transfer, installation, validation, serviceability, parts, warranty, and return rights. Confirm second-owner support before payment.
Operatory furniture also needs a condition and fit check. Use the ergonomic stools and operator seating comparison to assess height range, controls, casters, cleanability, trial fit, and return terms before considering a used stool.
Products and sourced details
-
Tuttnauer T-Edge 10/11
- Relevant sourced detail
Tuttnauer T-Edge 10/11 is a dental pre/post-vacuum autoclave family.
Workflow / procurement checks
- Buyers should evaluate chamber size, cycle programs, drying performance, documentation, water quality needs, installation, service network, validation requirements, warranty, and local regulatory expectations.
- Public price is quote-led in the sources checked.
- Confirm price, regional suitability, warranty, installation for Tuttnauer T-Edge 10/11 before purchase.
- For autoclaves, procurement should stay tied to documented cycle types, chamber capacity, installation requirements, water quality, service access, validation/documentation workflow, consumables, warranty, and local sterilization guidance.
Dental Spec Guide does not provide infection-control compliance advice; the page should help buyers ask better supplier and local-advisor questions before choosing equipment.
- Unknowns to verify
- price, regional-suitability, warranty, installation
-
Midmark M11
- Relevant sourced detail
Midmark M11 is a steam sterilizer commonly discussed for dental and medical instrument processing.
Workflow / procurement checks
- Buyers should compare chamber size, cycle types, footprint, documentation, service parts, maintenance, warranty, and regional availability before using it as a benchmark autoclave option.
- Confirm price, warranty, international availability for Midmark M11 before purchase.
- For autoclaves, procurement should stay tied to documented cycle types, chamber capacity, installation requirements, water quality, service access, validation/documentation workflow, consumables, warranty, and local sterilization guidance.
- Use this section in the quote process by turning each unknown into a supplier question: ask what is included, what is optional, what renews annually, what must be installed or configured locally, who provides training, who handles failures, and what documentation will be supplied before purchase.
Dental Spec Guide does not provide infection-control compliance advice; the page should help buyers ask better supplier and local-advisor questions before choosing equipment.
- Unknowns to verify
- price, warranty, international-availability
-
Medit i900
- Relevant sourced detail
Medit i900 is a premium wired intraoral scanner.
Workflow / procurement checks
- Medit lists a 165 g scanner weight including the medium tip, a compact 35 mm grip, expanded field of view, 10-bit imaging, touch controls, multiple tip sizes, tips rated for up to 150 autoclave cycles, calibration intervals up to 90 days, and STL/PLY/OBJ export through Medit Link rather than direct export from Medit Scan for Clinics.
- Confirm current price, regional warranty, training package for Medit i900 before purchase.
- For an intraoral scanner purchase, the important procurement question is not just the scanner body.
- Verify the export path, supported file formats, laptop or cart requirements, tip replacement cost, calibration/hygiene workflow, lab compatibility, software subscription position, training, and local service response.
If the vendor describes imaging, AI, or diagnostic-assist features, treat those as region-specific claims that require written confirmation before use in patient communication.
- Unknowns to verify
- current-price, regional-warranty, training-package
-
3Shape TRIOS 5
- Relevant sourced detail
3Shape TRIOS 5 is a wireless intraoral scanner in the 3Shape Unite ecosystem.
Key sourced details
- 3Shape lists a scanner wand, pod, tips, Unite software, patient engagement apps, TRIOS Share, Model Builder Express, three batteries, up to 66 minutes of continuous scanning per battery, charging under two hours, and 5 GHz wireless range up to 15 m.
Workflow / procurement checks
- Confirm non Spain price, local service package for 3Shape TRIOS 5 before purchase.
- For an intraoral scanner purchase, the important procurement question is not just the scanner body.
- Verify the export path, supported file formats, laptop or cart requirements, tip replacement cost, calibration/hygiene workflow, lab compatibility, software subscription position, training, and local service response.
- Use this section in the quote process by turning each unknown into a supplier question: ask what is included, what is optional, what renews annually, what must be installed or configured locally, who provides training, who handles failures, and what documentation will be supplied before purchase.
If the vendor describes imaging, AI, or diagnostic-assist features, treat those as region-specific claims that require written confirmation before use in patient communication.
- Unknowns to verify
- non-Spain-price, local-service-package
-
Dentsply Sirona CEREC Primemill
- Relevant sourced detail
Dentsply Sirona CEREC Primemill is a chairside dental milling machine in the CEREC ecosystem.
Key sourced details
- Headline machine capability is less useful than whether the system can reliably mill the restorations or appliances your practice or lab actually intends to produce.
Workflow / procurement checks
- It should be evaluated with scanner, CAD software, materials, blocks, burs/tools, maintenance, training, service, and restoration workflow economics, not as a standalone box.
- Confirm system price, warranty, training, software tco for Dentsply Sirona CEREC Primemill before purchase.
- For milling machines, evaluate the full production cell: wet/dry capability, axes, materials, blank/disc/block compatibility, CAM software, tooling, suction/coolant, maintenance, calibration, installation, training, service response, and downstream finishing.
- Use this section in the quote process by turning each unknown into a supplier question: ask what is included, what is optional, what renews annually, what must be installed or configured locally, who provides training, who handles failures, and what documentation will be supplied before purchase.
- Unknowns to verify
- system-price, warranty, training, software-tco
-
Planmeca Viso G3
- Relevant sourced detail
Planmeca Viso G3 is a CBCT unit.
Key sourced details
- This product also carries these editorial safeguards: procurement only.
- For CBCT systems, this site is procurement-only.
Workflow / procurement checks
- Coverage here is procurement-only: verify field-of-view options, installation, room shielding, software licenses, training, warranty, service, DICOM/export workflows, support response, and local radiation/licensing obligations.
- Confirm price, installation, software, training, warranty, licensing for Planmeca Viso G3 before purchase.
- Verify field-of-view options, software modules, installation space, shielding/building requirements, training, service, warranty, DICOM/export workflow, support response, and local licensing or radiation-safety requirements with qualified local advisors.
- Use this section in the quote process by turning each unknown into a supplier question: ask what is included, what is optional, what renews annually, what must be installed or configured locally, who provides training, who handles failures, and what documentation will be supplied before purchase.
No diagnostic advice is provided. Dental Spec Guide does not provide radiation, diagnostic, installation-compliance, or licensing advice.
- Unknowns to verify
- price, installation, software, training, warranty, licensing
Buying workflow
For autoclaves
verify service history, validation, gaskets, chamber condition, water quality history, and parts support.
For scanners
verify software license transfer, support eligibility, tips, calibration, laptop, and cloud account rules.
For mills and CBCT
verify installation, service, room requirements, software licenses, and whether the manufacturer will support a second owner.
Treat the purchase as an implementation project. Assign an owner, request written scope, document dependencies, plan staff training, and keep a fallback workflow for the first month after installation.
Verify before purchase
- Exact package, model, software modules, accessories, and consumables included in the quote.
- Regional warranty, service response time, loaner or replacement policy, and support hours.
- Training format, implementation timeline, data migration or installation responsibilities.
- Recurring software, cloud, subscription, support, storage, materials, parts, or consumable costs.
- Compatibility with your current scanners, PMS, labs, CAD/CAM tools, materials, payment systems, imaging systems, or IT environment.
- Tax, shipping, financing, cancellation, renewal, and data-export terms.
Official links
Tuttnauer T-Edge 10/11 official page Midmark M11 official page Medit i900 official page 3Shape TRIOS 5 official page Dentsply Sirona CEREC Primemill official page Planmeca Viso G3 official page
Evidence limits
Dental Spec Guide did not perform hands-on testing for this page. Product details should be rechecked before purchase because models, bundles, software terms, prices, and regional availability can change.